The four-piece entry kit can open almost any passenger car in a matter of seconds. The kit consists of an opening wedge (401234), entry cushion 2 in1 (401414), lasso opening tool (408105) and suction pad (401393), allowing the car to be opened in a variety of ways. A product from the ProLux range.

To seal broken glass areas and door cracks after an accident. Protects the inside of the vehicle against rain and dirt and the pursuing traffic against insecure vehicle parts. Doesn’t leave any adhesive marks on glass, metal or synthetic material when removed. (0.6 wide x 10m). A product of the ProLux range.

5500lb – 12v winch. The advanced S-series electric winches with three-stage planetary gear. Equipped, among others, with an automatic load-holding brake, a permanent magnet motor and a manual freewheel (hand or foot operation). Special highlights: The motor instant stop, no more overrun and the closed housing with the perfect protection in all weather conditions. The perfect winch for trailers! Comes with 9.1m cable remote control, roller fairlead, battery cable, 18.3m steel cable. A product of the ProLux range.  Available from UK stock.

18000lb capacity 24v winch – ideal for beavertails and low loader trailers. The Tiger Shark winches are equipped with a manual freewheel to unwind the winch cable from the drum by hand – comes with 9.1m cable remote control, roller fairlead, relay box, battery cable, steel cable 11.5 mm x 26 m. A product of the ProLux range.  Available from UK stock.

9500lb (4.3 ton) capacity 12v winch – ideal for beavertail’s and car trailers. The Tiger Shark winches are equipped with a manual freewheel to unwind the winch cable from the drum by hand – comes with 3.6m cable remote control, roller fairlead, relay box, battery cable, synthetic fibre rope 9.5 mm – 24 m. A product of the ProLux range.  Available from UK stock.

RO14 TOR – would suit any Rotator (2014 onwards) – currently on retention.

9500lb (4.3 ton) capacity 12v winch – ideal for beavertail’s and car trailers. The Tiger Shark winches are equipped with a manual freewheel to unwind the winch cable from the drum by hand – comes with 3.6m cable remote control, roller fairlead, relay box, battery cable,
steel cable 8mm x 29 m. A product of the ProLux range.  Available from UK stock.

Extendable aluminium spreader bar with 3000 kg rating. Can extend from 2 m to 3.3 m in three steps on each side. This makes damage-free lifting of wide vehicles possible. Two handles and only 22 kg weight allow easy handling. Delivered with shackles and round slings. **Wheel straps also available at extra cost** A product of the ProLux range. In stock now!

The ideal solution for vehicles with removable towing lugs. More and more vehicles of the new generation are equipped with removable towing lugs. This can cause problems during recovery operation if the towing lug cannot be found or is stored in the car boot underneath the luggage. Another problem is the quality of the original towing lugs as very often they cannot cope with the incurred forces.

Our adapter hooks are made out of zinc-plated high-strength steel. The collapse load is tested up to 6 t. The adapter parts are ready for operation within seconds and secure to handle thanks to their snap-in function . With the enclosed list you will easily find the suitable towing lug for the vehicle to tow. A product from the ProLux range.

Fitted with Briggs & Stratton 35hp petrol engine, full radio remote control etc. Available end of April. Finance packages available (subject to status).

The perfect helmet for use in hazardous situations – during recovery work, by danger of falling parts and other dangerous work. Due to the head width, height and tilt regulation, as well as the inner padding, this industrial protective helmet is also comfortable to wear over a long period of time. The chin strap has a quick release fastener and a quick opening according to EN 397. Perfect visibility through scratch-resistant and fog-free visor. In addition, reflex applications also provide protection in the dark. Impact-resistant through polypropylene outer shell and inner shell made of HD polystyrene. All commercially available headlamps can also be fastened via light clips on the side. A product from the ProLux range.