Tow skates are ideal for loading and unloading vehicles with blocked wheels. The skates can be placed under the tyre by hitting them with a rubber mallet or vehicle is simply pulled onto the skates via the winch. Wide design for smooth sliding of the vehicles. Choice of  Neon Yellow or Red. A product of the ProLux range.

5500lb – 12v winch. The advanced S-series electric winches with three-stage planetary gear. Equipped, among others, with an automatic load-holding brake, a permanent magnet motor and a manual freewheel (hand or foot operation). Special highlights: The motor instant stop, no more overrun and the closed housing with the perfect protection in all weather conditions. The perfect winch for trailers! Comes with 9.1m cable remote control, roller fairlead, battery cable, 18.3m steel cable. A product of the ProLux range.  Available from UK stock.

12000lb capacity -12v winch. The Superwinch electric winches of the SX series are equipped with a powerful 12v series-wound motor and a three-stage planetary gear. Special feature of this series, patented drum lighting, protection class IP68 and the relay box can be relocated depending on the space available. The winches have an automatic load holding brake to secure the load to be pulled against rolling away and a freewheel clutch for pulling the rope by hand. The housing parts are made of aluminium and the drum of steel. This ensures low weight and maximum stability in use. Comes with 3.6 m cable remote control, radio remote control, hawse, relay box, battery cable and 24m synthetic fibre cable. A product of the ProLux range.  Available from UK stock.

18000lb capacity 24v winch – ideal for beavertails and low loader trailers. The Tiger Shark winches are equipped with a manual freewheel to unwind the winch cable from the drum by hand – comes with 9.1m cable remote control, roller fairlead, relay box, battery cable, steel cable 11.5 mm x 26 m. A product of the ProLux range.  Available from UK stock.

9500lb (4.3 ton) capacity 12v winch – ideal for beavertail’s and car trailers. The Tiger Shark winches are equipped with a manual freewheel to unwind the winch cable from the drum by hand – comes with 3.6m cable remote control, roller fairlead, relay box, battery cable, synthetic fibre rope 9.5 mm – 24 m. A product of the ProLux range.  Available from UK stock.

Used Dyson 2500kg foldable lifting frame with wheel clamps, manual levelling ram (cab type lift pump).

Powered by 55 hp diesel engine with full remote control, 3500kg capacity – ideal for large 4×4’s and vans, 4200kg capacity winch, work-lights, strobe light etc. Finance packages available (subject to status).

RO14 TOR – would suit any Rotator (2014 onwards) – currently on retention.

9500lb (4.3 ton) capacity 12v winch – ideal for beavertail’s and car trailers. The Tiger Shark winches are equipped with a manual freewheel to unwind the winch cable from the drum by hand – comes with 3.6m cable remote control, roller fairlead, relay box, battery cable,
steel cable 8mm x 29 m. A product of the ProLux range.  Available from UK stock.

Very light use from new – powered by 55 hp Diesel engine with full remote control, 3500kg capacity – ideal for large 4×4’s and vans, 4200kg capacity winch, work-lights, strobe light etc. In excellent condition throughout – immediate availability. Finance packages available (subject to status).

Extendable aluminium spreader bar with 3000 kg rating. Can extend from 2 m to 3.3 m in three steps on each side. This makes damage-free lifting of wide vehicles possible. Two handles and only 22 kg weight allow easy handling. Delivered with shackles and round slings. **Wheel straps also available at extra cost** A product of the ProLux range. In stock now!

The ideal solution for vehicles with removable towing lugs. More and more vehicles of the new generation are equipped with removable towing lugs. This can cause problems during recovery operation if the towing lug cannot be found or is stored in the car boot underneath the luggage. Another problem is the quality of the original towing lugs as very often they cannot cope with the incurred forces.

Our adapter hooks are made out of zinc-plated high-strength steel. The collapse load is tested up to 6 t. The adapter parts are ready for operation within seconds and secure to handle thanks to their snap-in function . With the enclosed list you will easily find the suitable towing lug for the vehicle to tow. A product from the ProLux range.